TSP/Bleach Cleaning Instructions, Maintenance Recommendations for using the Perma-Chink Lifeline products.

BACK TO INDEX

Informative Maintenance Article

Oxcon is an easy, do-it-yourself blonding agent, designed to clean away grime and brighten up wood surfaces of exterior/interior logs, deck boards, railings and fences. This powerful blonding agent works to return gray weathered wood to its natural golden color, before to using water-resistant finishes or semi-transparent stains.

Oxcon may be applied with a sprayer, roller, brush or broom. Use liberal amounts (a flowing coat) over a specific area. Do not spot-treat since this method of application could cause blotching. Let the solution sit on the surface for 10-15 minutes, then rinse with plenty of water. Apply from bottom up and rinse from top down.

Oxcon contains oxalic acid that works to revive your woodwork, giving your wood a fresh, natural look.

Product Price List

Pro-Strip was developed to give professional results when removing previous oil-based or latex coatings.

M-Balm epoxy liquid penetrates deeply into porous, deteriorated, dried-out or spongy wood, curing and hardening into a strong, water-resistant mass that includes both the original wood fibers and the epoxy mixture.

The more M-Balm used, the stronger the restored wood member will become. It consolidates the decayed area in preparation for use with E-Wood.

1. Mix two parts M-Balm epoxy with one part hardener.
   Mix only what can be applied in 30 minutes.
2. Apply to affected area with applicator squeeze bottle.
   Repeat if necessary.
3. In extreme cases, drill holes into the decayed wood and pour liberally into the affected area.

Product Price List

E-Wood is a putty-like, non-shrinking, epoxy filler used to fill in missing sections of logs or dimensional wood members.

E-Wood will form a permanent bond to most rigid surfaces. Porous surfaces should always be treated with a compatible, low viscosity epoxy system such as M-Balm. Use E-Wood to replace missing sections of window sills, frames, furniture, or any wood structure.

Use it to add new sections to completed structures.

After repair with E-Wood, restored wood can be shaped with your normal wood working tools, including saws, sanders, planes, routers and drills.

1. With disposable gloves, combine E-Wood epoxy and hardener. Do not mix more than can be applied in 15 minutes.
2. Apply over wood that has been treated and sealed with M-Balm. Mold to rough finished shape.
3. When cured, sand, nail, carve, paint or stain as desired.

Product Price List

BACK TO PERMACHINK