|
 
To
order product call: 800 548-3554
|
More
details on Armor-Guard
Armor-Guard
™ is a water soluble inorganic borate salt with insecticidal,
termiticidal and fungicidal properties. Armor-Guard is effective
for protection and remedial treatment of wood against
wood-destroying organisms, including the target pests listed
below. This product can be used for remedial treatment of wood
infested with target organisms, for preventative treatment of wood
in existing structures (before signs of infestations), or for
pre-treatment of wood during construction.
TLH
Note: Although other borates are available, we are limiting
our coverage to the Armor-Guard application.
|
|
PRE-TREATMENT
Spray or powder/dust applications of Armor-Guard may also be made
to wood during construction. Apply solution to all accessible
surfaces of bare wood at a rate of approximately 5 gallons per
1000 sq.ft.
Application
should be performed after framing and roofing are in place and
before insulation and dry wall are installed.
Avoid
spaying electrical components. Protect treated wood from excessive
rain. End-cuts of wood may also be treated by spray or brush
methods listed above, or by 5 minute dipping in Armor-Guard
treatment solution.
|
