It protects against fading and discoloration due to decay, fungus and mold while providing water repellency by penetrating deeply into the wood.

Blairstown Distributors, http://www.blairstowndistributors.com

We offer Woodguard in 20 colors.

To order WOODguard call: (800) 524-1093, Blairstown Distributors  or 888 208-2248

Only one coat is needed with this quality product that begins protecting wood with the first application.  (Apply to saturation point.)  We recommend a second coat after 12 to15 months.

   Woodguard also protects against cupping, curling and warping as well as insects such as powder post beetles and termites.  It is VOC compliant in all 50 states.  The active ingredient, copper 8 quinolinolate is suitable for use on wood that may have incidental food contact.

Includes insecticide, fungicide, termicide.

Coverage:  150 - 200 sq. ft. per gallon. Apply to point of refusal.

One coat, well applied, is sufficient to repel water on vertical surfaces. The following treatment schedule is suggested.  WoodGuard has a cumulative effect in the wood with each application.

• New construction:  1 coat of approximately 75-100 sq. ft. per gallon (applied to the point of refusal).  Smooth out runs by "back brushing".
• Year 2 after construction:  1 coat of approximately 150-200 sq. ft. per gallon.
• Year 4 or 5 after construction:  1 coat of approximately 200 sq. ft. per gallon.
• Every 5 to 8 years thereafter:  1 coat of approximately 200 sq. ft. per gallon.
• Old Weathered Wood:  1 coat to the point of refusal.  Approximately 75-100 sq. ft. per gallon.

*Surfaces subjected to standing water, chlorine, sprinkler systems, concrete flashback, or other harsh conditions may require earlier retreating or spot treatments.