INTERIOR STAINING                 All wood products to be stained (log walls, tongue &groove walls, beams, etc.)( should first be cleaned with a solution approved by the sealant manufacturer if necessary).  Mix the solution as recommended, apply with a garden sprayer, scrub the wood with a brush and rinse.  Sanding may also be needed before staining.  A random orbital sander is the best tool for this task.  All beams (4x8, 3x12, 6x12, etc.) should be stained before installation.                 You should also apply a sealant to your interior wood products after staining (some products are stain and sealant combined).  This is usually a clear finish varnish-type product and can be sprayed on with an airless sprayer.  Back brushing is usually required to prevent running.  Each of the companies whose literature you received with your home manufacture interior sealants.  Refer to the manufacturer’s installation instructions for exact procedures for applying interior stains and sealants.

Attention!   The Industry's BEST Training Seminar starts in 324 days. IT'S FREE! CLICK HERE to learn more and/or register, and read hundreds of testimonials. FREE Literature   FREE Monthly Newsletter   Home Shows   Quality Links